Information

The Mapex Saturn VI 20" Drum Kit, Cobalt Burst is now available with us at Graham Russell Drums.

The Saturn VI marks the first step into Mapex’s professional drum range. Building on the Saturn IV and Saturn V, it keeps the maple and walnut shell design that made the series distinctive and adds hardware developed through Mapex’s flagship Design Lab programme.

For more than two decades, the Saturn sound has come from the combination of maple and walnut. Maple brings warmth and balance, while walnut adds depth and a darker low end. The result is a rich, articulate sound with enough attack and projection for rock and metal, and enough control for quieter playing in the studio.

This four-piece configuration comes in a high-gloss Cobalt Burst lacquer over an exotic veneer, with chrome shell hardware. Its undrilled 20" x 16" bass drum keeps the setup compact, and the two included TH800 single tom holders let you mount the rack toms independently from compatible stands.

The Saturn Legacy Continues

Saturn IV and Saturn V earned a following among touring drummers and recording musicians for the depth and definition of their hybrid shells. Saturn VI retains that shell recipe and updates how the drums are mounted and isolated, preserving the sound that established the series.

Maple and Walnut Hybrid Shells

Saturn VI combines American maple with African walnut. The rack and floor toms use 6-ply, 6.15 mm shells for a quick response and open resonance. The bass drum uses a thicker 8-ply, 7.55 mm shell for more body and low-end weight.

The drums stay rich and controlled at lower dynamics and open up when played harder. That balance makes the kit useful across a wide range of styles, especially when you need a clear attack without losing warmth.

SONIClear™ Bearing Edges

Mapex SONIClear™ bearing edges help each drumhead sit flatter and make more even contact with the shell. This makes tuning easier, brings out a stronger fundamental note and gives the drums a wider usable tuning range.

SONIClear™ Tom Suspension

The SONIClear™ Suspension System helps preserve the rack toms’ natural vibration by reducing interference from the mounting hardware. The toms retain an open sound with sustain and projection, while the mounts give you flexibility over their positioning.

Design Lab Floor Tom Technology

The SAS Static 90° floor tom legs reduce vibration transfer into the floor, while the Sonic Pedestal Feet support the legs on raised rubber to isolate the drum further. Floor Tom Isolation Gaskets separate the metal leg brackets from the shell, reducing direct hardware contact. Together, these features help the 14" x 14" floor tom hold its deep, resonant note.

Air Flow Venting

Developed through Mapex’s Design Lab programme, Air Flow Venting manages how air moves through the shell as the drum is played. It helps give the drums an immediate, controlled response.

Triple-Flanged Power Hoops

The Triple-Flanged Power Hoops give the toms a focused attack and support stable tuning while allowing the heads and shells to resonate openly.

Expanding Your Shell Pack

Individual Saturn VI bass drums, rack toms and floor toms are available separately, so the four-piece setup can be expanded as your playing needs change.

Specifications

  • 20" x 16" undrilled bass drum with no tom holder mount

  • 10" x 7" and 12" x 8" rack toms

  • 14" x 14" floor tom

  • Two TH800 single tom holders included

  • American maple and African walnut hybrid shells

  • 6-ply, 6.15 mm rack and floor tom shells

  • 8-ply, 7.55 mm bass drum shell

  • Mapex SONIClear™ bearing edges and rack tom suspension

  • Triple-Flanged Power Hoops

  • Design Lab Air Flow Venting

  • SAS Static 90° floor tom legs

  • Sonic Pedestal Feet and Floor Tom Isolation Gaskets

  • Chrome shell hardware

  • Cobalt Burst exotic lacquer finish

Why Choose Mapex Saturn VI?

The Saturn VI is a good fit for drummers moving beyond an intermediate kit who want a shell pack for recording, touring or regular live work. The maple and walnut shells deliver enough attack to cut through a dense guitar mix, while their darker low end gives each note weight. The broad tuning range and balanced response also suit pop, funk and fusion. This configuration gives you that Saturn character in a compact setup built around a 20" bass drum.

Key Features

  • Professional Mapex shell pack that builds on the Saturn IV and Saturn V

  • Maple and walnut hybrid shells with clear attack, warmth and a deep low end

  • Compact 20" configuration with two independently mounted rack toms

  • SONIClear™ bearing edges and suspension for easier tuning and open resonance

  • Design Lab floor tom hardware that helps preserve sustain

  • High-gloss Cobalt Burst lacquer with chrome shell hardware

  • Expandable with individual Saturn VI drums

Josh Devine Video

The kit shown in the video is finished in Marine Teal Burst.

Watch Josh Devine play the Mapex Saturn VI

Please note: This shell pack includes the four drums listed, two TH800 single tom holders and floor tom legs. Snare drum, cymbals, stands, pedals and other hardware are not included.

Bring the depth and punch of Saturn VI to a compact setup with the Mapex Saturn VI 20" Drum Kit in Cobalt Burst from Graham Russell Drums.

Mapex Saturn VI 20" Drum Kit, Cobalt Burst

£1,395.00
Pay over time with Omni. Contact us for more info.
Buy a new Mapex Saturn VI 20" Drum Kit, Cobalt Burst from Graham Russell Drums. Next day delivery on in stock items when ordered before 2pm. Read more
  • FREE SHIPPING ON ORDERS OVER £195
  • APPROX 10,000 PRODUCTS
  • MONEY BACK GUARANTEE
  • SAFE PAYMENT
  • 0% FINANCE AVAILABLE
  • NOT SATISFIED? WE WILL SOLVE IT!

Return it for any reason. Easy Returns Policy

Specifications

Brand:
Mapex
Condition:
New
SKU:
SR504XZ-XQ
Available in store
Available in warehouse

Available in store

Close